Sample Dark Oak Floor Tiles
Click Image for Gallery
Design:
Dark oak design that looks like real wood.
Sample Size:
The samples are 1/4 of a tile and approximately: 15.25 x 15.25cm
Product Information:
- easy to cut to size and apply
- resistant to humidity in bathrooms
- waterproof (but not suitable for within the shower)
- self-adhesive
- suitable for flat, hard and clean surfaces (e.g. flat floor tiles)
- easy to reposition during application
- easy to wipe clean
- fully removable
- for DIYers that want to save time & money on flooring
To find out if these tiles are suitable for your project we recommend that you order a sample first and check the design, colour and quality. You will see how easy it is to apply, clean and remove.
This is how you install the self-adhesive floor tiles. Make sure that you follow all instructions carefully.
Place the floor tiles in the room at least 48h before application at room temperature ( 20-2
2
°C)Fix any cracks or chips in existing tiles before you start
- Clean the floor thoroughly removing any dirt or grease
Dry the floor
Remove the backing paper
- Apply the tiles by pressing it down firmly with your hands. Press in the middle first and then the edges. Optional: Use an unused paint roller for a firmer pressing. Make sure that edges are butted together
- The tiles can be cut to size. Mark the back with a pen and then score your mark with a craft knife
- Bend to snap the score
- Allow 24h for the adhesive to bond
This video show how to apply self-adhesive floor tiles
Aftercare
- Wait 5 days before cleaning the Classic Floor Tiles for the first time
- Clean the tiles regularly. They can be damp-wiped with a light detergent
- Vacuum cleaners and brooms are fine to use
- Take care with sharp objects
- Avoid standing moisture
Subfloors which are suitable for the Classic Floor Tiles:
- (floating) screed
- Glued PVC floor
- Polished concrete
- Smooth, jointless wooden floor (Caution: should be degreased and neutralised with water)
- Ceramic tiles (Caution: the ceramic tiles should have a smooth surface and the joints should not be wider than 3mm)
Subfloors which are not suitable for the Classic Floor Tiles:
- Floating floors (Laminate, Click Vinyl, Parquet)
- Linoleum
- Smooth surfaces (e.g. carpets)
- Floors with heating
- Outside
- Floors exposed to high temperature or permanent direct sunlight
- Floors exposed to permanent moisture
- Dirty and dusty floors
We recommend that you read our FAQ page before installing the Floor Tiles.