NZ Delivery: Flat Rate NZ$8.00, AUS Delivery: Weight based from NZ$19. See more details here
NEW IN STORE NOW!!! Check it out!

Sample Grey Wood Floor Tiles

New Sample Grey Wood Floor Tiles
Design:

Grey wood design that looks like real wood. 



Sample Size:

The samples are 1/4 of a tile and approximately: 15.25 x 15.25cm


Product Information:

  • easy to cut to size and apply
  • resistant to humidity in bathrooms
  • waterproof (but not suitable for within the shower)
  • self-adhesive
  • suitable for flat, hard and clean surfaces (e.g. flat floor tiles)
  • easy to reposition during application
  • easy to wipe clean
  • fully removable
  • for DIYers that want to save time & money on flooring


To find out if these tiles are suitable for your project we recommend that you order a sample first and check the design, colour and quality. You will see how easy it is to apply, clean and remove.


This is how you install the self-adhesive floor tiles. Make sure that you follow all instructions carefully.

  1. Place the floor tiles in the room at least 48h before application at room temperature ( 20-2

    2

    °C)
  2. Fix any cracks or chips in existing tiles before you start 

  3. Clean the floor thoroughly removing any dirt or grease
  4. Dry the floor

  5. Remove the backing paper

  6. Apply the tiles by pressing it down firmly with your hands. Press in the middle first and then the edges. Optional: Use an unused paint roller for a firmer pressing. Make sure that edges are butted together
  7. The tiles can be cut to size. Mark the back with a pen and then score your mark with a craft knife
  8. Bend to snap the score
  9. Allow 24h for the adhesive to bond


This video show how to apply self-adhesive floor tiles


Aftercare
  • Wait 5 days before cleaning the Classic Floor Tiles for the first time
  • Clean the tiles regularly. They can be damp-wiped with a light detergent 
  • Vacuum cleaners and brooms are fine to use
  • Take care with sharp objects
  • Avoid standing moisture

Subfloors which are suitable for the Classic Floor Tiles:
  • (floating) screed
  • Glued PVC floor
  • Polished concrete
  • Smooth, jointless wooden floor (Caution: should be degreased and neutralised with water)
  • Ceramic tiles (Caution: the ceramic tiles should have a smooth surface and the joints should not be wider than 3mm)


Subfloors which are not suitable for the Classic Floor Tiles:
  • Floating floors (Laminate, Click Vinyl, Parquet)
  • Linoleum
  • Smooth surfaces (e.g. carpets)
  • Floors with heating
  • Outside
  • Floors exposed to high temperature or permanent direct sunlight
  • Floors exposed to permanent moisture
  • Dirty and dusty floors

We recommend that you read our FAQ page before installing the Floor Tiles.

Write a review

Note: HTML is not translated!
    Bad           Good

  • Brand: d-c-fix
  • Product Code: S2745042
  • Availability: 40
  • NZ$2.50
  • Or 6 payments from NZ$0.42 (What's this?)
  • Ex Tax: NZ$2.17

Tags: samples, tiles